Škoda Octavia Workshop Manual 1.9-ltr. / 66 kW (TDI) Engine Fuel Injection and Glow Plug System



Škoda Octavia Workshop Manual 1.9-ltr. 66 kW (TDI) Engine Fuel Injection and Glow Plug System PDF

Škoda Octavia Workshop Manual (S00.5111.50.20 Edition 08.96) 1.9-ltr. / 66 kW (TDI) Engine Fuel Injection and Glow Plug System PDF Free Download.

CONTENTS:

Self-Diagnosis

  • Self-Diagnosis
  • – Properties of the self-diagnosis
  • – Technical data of self-diagnosis
  • – Connecting tester V.A.G 1552 and select engine electronics control unit
  • – Interrogating and erasing fault memory
  • – Fault table
  • Actuator diagnosis
  • – Performing actuator diagnosis
  • – Basic setting
  • – Coding control unit
  • Readiness code
  • – Reading readiness code
  • – Generate readiness code
  • Measured value blocks
  • – Reading measured value block
  • – Display nominal values for general vehicle inspection
  • – Display nominal values for injection pump
  • – Display nominal values for engine idling
  • – Display nominal values for exhaust gas recirculation
  • – Display nominal values for temperature sensor
  • – Display nominal values for automotive power
  • – Display nominal values for charge pressure control

Fuel Formation/ Injection

  • Servicing a diesel direct fuel injection system
  • – Safety measures
  • – Rules for cleanliness
  • – Overview of fitting locations >- 07.97
  • – Overview of fitting locations 08.97 >- 07.00
  • – Overview of fitting locations 08.00 >-
  • – Assembly overview of injection pump
  • – Assembly overview of fuel filter
  • – Assembly overview of throttle mechanism
  • – Adjusting sender for accelerator pedal position
  • – Disassembling and assembling air filter
  • – Removing and installing injection pump
  • – Dynamically testing and setting commencement of injection
  • – Removing and installing and testing injection nozzles
  • – Wiring and Component Test with Test Box
  • – Replacing engine control unit
  • Inspecting the charge air pressure system
  • – Inspecting charge air pressure
  • – Inspecting charge pressure control solenoid valve (N75)
  • – Inspecting intake manifold temperature sender (G72)
  • – Inspecting intake manifold pressure sender (G71) and altitude sender
  • – Hose layout plan for charge pressure control
  • Testing injection control
  • – Testing injection timing device control range
  • – Testing the commencement of injection valve (N108)
  • – Inspecting fuel temperature sender
  • Inspecting exhaust gas recirculation system
  • – Inspecting exhaust gas recirculation
  • – Inspecting exhaust gas recirculation valve (N18)
  • – Inspecting air mass meter (G70)
  • – Vacuum plan of hose layout plan for the exhaust gas recirculation system
  • Inspecting control units input quantities
  • – Testing voltage supply for diesel direct injection system
  • – Testing engine speed sender (G28)
  • – Testing needle lift sender (G80)
  • – Testing coolant temperature sender (G62)
  • – Testing brake light switch and brake pedal switch
  • – Testing modulating piston movement sender (G149) and metering adjuster (N146)
  • – Testing accelerator pedal position sender (G79)
  • Testing auxiliary signals
  • – Testing signals from/to the air conditioning system
  • – Testing clutch pedal switch (F36)
  • – Testing speed signal
  • – Testing engine speed signal
  • – Activating or deactivating cruise control system
  • – Testing cruise control system
  • – Testing CAN-Bus databus
  • Servicing intake manifold 08.97
  • – Inspecting the change-over of the intake manifold flap
  • – Hose layout plan for intake manifold flap operation

Glow plug system

  • Inspecting glow plug system
  • – Inspecting proper operation
  • – Inspecting glow plugs
  • – Inspecting glow period warning lamp

Language: English
Format: PDF
Pages: 194
Size: 7.69 Mb
Free download Skoda Octavia Workshop Manual 1.9-ltr. / 66 kW (TDI) Engine Fuel Injection and Glow Plug System PDF
Password: cardiagn.com
https://cloud.mail.ru/public/FHPs/1kpWGuM5D