Škoda Octavia Workshop Manual 1.8 ltr./92 kW Engine – Motronic Fuel Injection and Ignition System



Škoda Octavia Workshop Manual 1.8 ltr.92 kW Engine - Motronic Fuel Injection and Ignition System PDF

Škoda Octavia Workshop Manual (S00.5107.50.20 Edition 08.96) 1.8 ltr./92 kW Engine – Motronic Fuel Injection and Ignition System PDF Free Download.

CONTENTS:

Self-Diagnosis

  • Self-diagnosis
  • – Features of self-diagnosis
  • – Technical data of self-diagnosis
  • – Connecting vehicle system tester V.A.G 1552 and selecting engine electronics control unit
  • – Interrogating and erasing fault memory
  • – Fault table
  • – Fault table from fault code 00515 to 01165
  • – Fault table from fault code 01182 to 16502
  • – Fault table from fault code 16504 to 17736
  • – Fault table from fault code 17913 to 18262
  • – Final control diagnosis
  • Measured value blocks
  • – Reading measured value block
  • Lists of display groups
  • – Display group 000 to 007
  • – Display group 008 to 099

Fuel Formation/Fuel Injection

  • Servicing fuel injection system – valid  >07.97
  • – Overview of fitting locations
  • Servicing fuel injection system – valid 08.97 >
  • – Overview of fitting locations
  • – Servicing fuel injection system
  • – Disassembling and assembling top part of intake manifold – valid > 07.97
  • – Disassembling and assembling top part of intake manifold – valid 08.97 >.
  • – Disassembling and assembling bottom part of intake manifold – valid > 07.97
  • – Removing and installing air filter, air mass meter
  • – Disassembling and assembling bottom part of intake manifold – valid 08.97 >
  • – Removing and installing air filter, air mass meter and intake air temperature sender
  • – Safety precautions
  • – Rules for cleanliness
  • – Technical data
  • Testing components and functions
  • – Testing idling speed
  • – Testing fuel tank ventilation
  • – Testing throttle valve control unit
  • – Testing idling speed switch
  • – Testing throttle valve positioner sender and throttle valve potentiometer
  • – Testing intake air temperature sender – valid >- 07.97
  • – Testing intake air temperature sender – valid 08.97 >
  • – Testing engine speed sender
  • – Testing coolant temperature sender (G62)
  • – Testing voltage supply for control unit
  • – Testing fuel pressure regulator and holding pressure
  • – Testing injected quantity, leaktightness and spray pattern of injectors
  • – Testing injectors – valid >07.97
  • – Testing injectors – valid 08.97 >
  • – Testing fuel pump relay and actuation
  • – Testing air mass meter – valid > 07.97
  • – Testing air mass meter – valid 08.97 >
  • – Testing intake system for leaks (unmetered air)
  • Testing lambda control
  • – Poor driving characteristics after cold start
  • – Testing function
  • – Testing lambda probe heater
  • – Testing lambda probe signal cable and actuation
  • – Removing and installing lambda probe
  • Replacing, coding and adapting engine control unit
  • – Replacing engine control unit
  • – Coding engine control unit
  • – Adapting engine control unit to electronic immobilizer
  • – Adapting engine control unit to throttle valve control unit
  • – Performing basic setting of engine control unit
  • Testing additional signals
  • – Testing AC compressor cut-off
  • – Testing engine speed adaptation by switching on air conditioning
  • – Testing selector lever position of automatic gearbox
  • – Testing engine speed signal
  • – Testing throttle valve position
  • – Testing vehicle speed signal
  • – Testing gearbox control signal during gearshift
  • – Testing variable intake manifold changeover – valid 08.97
  • – Testing vacuum system
  • – Testing variable intake manifold changeover valve
  • – Testing signal from power steering pressure switch

Ignition System

  • Servicing ignition system
  • – Overview of components
  • – Safety precautions
  • – Technical data of ignition system
  • Testing components and functions
  • – Testing twin-spark ignition system with two ignition coils
  • – Testing knock sensors
  • – Testing Hall sender
  • – Testing camshaft adjuster
  • – Testing solenoid valve of camshaft adjuster

Language: English
Format: PDF
Pages: 196
Size: 12.1 Mb
Free download Skoda Octavia Workshop Manual 1.8 ltr./92 kW Engine – Motronic Fuel Injection and Ignition System PDF
Password: cardiagn.com
https://cloud.mail.ru/public/3xUm/3JiDdsdWa